Important note: This page is obsolete, and kept for archive purposes only. I now recommend a much easier technique to install a CFW on your PSP. If you reached this page from an other website, I recommend you go back to the page presenting the easy technique to install Pro CFW. This page is kept for archive purposes only.
You reached this page because you want to install a Custom Firmware on your PSP3000, PSPGo, or a PSP2000 with a UNhackable motherboard (ta88v3), and you currently have a firmware 6.37, 6.38, or 6.39 installed on your PSP. If you’re not sure of that anymore (psp 2000 owners, there is a chance your motherboard could be hackable), or if you want to check again, or if you have a different PSP model, please go back to the main page of this guide.
If you have a Firmware 6.37 or above, you need to downgrade your PSP before you can install a Hen on it. The current downgrade solutions do not really let you a choice to where you downgrade to, but this might change in the future. For now, in most cases you will downgrade to OFW 6.20 (which allows you to go back to 6.35 afterwards if you want to), but if you have a PSP 3000 with a 7g/9g motherboard, you will have to go to OFW 6.35.
7g/9g motherboards don’t support OFW 6.20 due to some driver limitations.
- If you have a PSP 3000 with a 7g/9g motherboard, go to this page to downgrade your PSP to Firmware 6.35.
- If you have any other PSP model, go to this page to downgrade your PSP to Firmware 6.20
- If you have a PSP 3000 but are not sure about your motherboard type, try first to downgrade to 6.20, and if it doesn’t work, try instead to downgrade to 6.35
You should now be on Firmware 6.35 or 6.20. Go back to the Firmware selection page to see the next step (installing a Hen).
well how do the hackers do to create hacks and stuff because i wanna create one
Hackers find a Kernel Exploit within the PSP’s Official Firmware, a flaw in the PSP Kernel that allows Kernel Access. Then they build upon that Exploit. As for the actual LCFW/HEN itself… If you know nothing about programming, don’t even think about it.
It requires a lot of coding knowledge, TN’s HEN took 2-3 months to complete and he’s a skilled programmer.
What kind of code do you need to know, and how do write the code? Do you use a text editor or a certain program?
actually using fake_np we can play iso on 6.37
how
how…pls do tell?
Thanks, updated the page
is there a hen 6.37 on psp 3004? i want to play iso games
hello…
just download eboot games…and but it on are folder and you can play it….
Sorry for the newbie question:
If I buy a PSP through the internet, is there no way to know what firmware I’m getting – either 6.37 or a lower version – or are all newly sold PSP’s 6.37?
hey when is 6.37 cfw coming out? (psp go)
if you not making one then
can you pls make 6.37 downgrader PLS!!!6.37 pro is not coming out…
they making are new one it 6.38 pro…18/5.11…
just ask the guys… for more info about the psp your buying..
but don’t buy it from big w… it 6.37 ver…
@buddhafrog,
yes, there is no way to know it unless you buy the actual unit and see for yourself.
Last February I bought a psp3001 from japan that has a ver. 6.20.
the 6.37 was released January 2011.
I think it would really depends when was the unit released.oh!i can’t install
“Bad a Detect ….. can”t Run On FAT”
But I Use Psp 3000
What mean???
Please Reply Me …If it says that it can’t run on fat, then it probably means that it does not run on the PSP fat, which is the PSP 1000.
wololo is it possible to downgrade from 6.37 to 6.35 or put 6.35 update in the media and updates back to that firmware in order to make the hack of cfw work? sorry if sounded silly but my birth by sleep game got messed up and i really want a back up of it so is there atleast any form downgrade for my psp?:AV105138592_PSP 3001 6.37 i hope you can give me a hope of encouragement or way for my dilemma asap sincerely , Professor patrick star
can fake np run iso games?
yes, but only those smaller than 728 Mb or so.
you need a windows (PC) app first.
how can i play iso games on psp go ver6.37?
Yes u can.
there is another way to play isos on your pspgo with 6.37
.Download UMD GEN
.Download iso2eboot
.Create a new folder on your desktop
.Drop your iso2eboot in there
.Place a iso inside the folder with iso2eboot
>click iso2ebooot then it should say patching please wait
.After it is done patching you Should get a folder called PSP click it another folder should be there called game.
Once you have the folder game u should see the file with an eboot.
finally plug your pspgo or 3000 but make sure your iso is smaller than 728mb or it wont work.
After its connected go to your psp folder click game.
Tricky part here after u open game on YOUR PSP OPEN BACK UP THE FILE WITH YOUR EBOOT DRAG THAT FILE TO GAME ON YOUR PSP THEN DISCONNECT YOUR PSP AFTER IT TRANSFERS GO TO YOUR SAVE GAME DATA OR WHERE YOUR GAMES ARE ON YOUR MEMORY STICK YOUR GAME SHOULD BE THERE YOUR GOING TO GET A BLACK SCREEN WITH CHINESE WORDS AND 10 SECS LATER YOUR GAME SHOULD LOADhi i wanted to know if u want to play iso files do u need to install the custom firmware or can u play them without instaling custom firmware cause i hav 6.37 right now so can i get the iso by the method stated by darkdriver95
Hi DarkDriver95,
In my PSP Go after GET A BLACK SCREEN WITH CHINESE WORDS nothing happen! black screen forever… why is that? do you have any idea?
Thanx in Advance…
If you say that you have a black screen forever, you probably bricked your console. All you can do now is send it off to Sony to fix it, or keep it and have a nice paperweight.
i got hbl from a youtube video with the links but i dont know how to download emulators
just pick one of the emulators and put it on your game list and download some roms
Where do you get roms?
how can I install isos in my PSP 3001 with OFW 6.37 please reply
sorry mate you can’t play iso on ofw 6.37
hey…
can you pls make one for 6.37 downgrade or 6.37 cfw plss??? on psp go/psp 3000PLS!!!
hey just download iso tool??
it work on hbl…
and it faster…
for DarkDriver95 every time i convert an iso to an eboot and put it in psp game folder and play it on psp a screen with wierd letters comes on but when they go off it says game could not be started and ive tried this with 2 games i have a psp 3000 version 6.37 so can u upload a whole bunch of games tht work like on yahoo and send it to me
okay i sent you link for games just ask me what game do you want…
ADD mE on hotmail natthawat25@hotmail.com
Send me some Eboots please any
I want EBOOTS please could u mail it at my hotmail id already added u
@master sasuke uchiha
not all games work with iso2eboot (usually those bigger than 728mb won’t work)hahaha… i found somthings better it work on 1898mb….
Hey bro can u share it with me IF ITS TRUE
can u help me convert the god eater burst in eboot.pbb? thanks
what do you found can u share it with me?
i Really want to record gameplay on my computer screen is there anyway i can with hbl?
can anyone tell me when tn gonna realease 6.38 cfw hes really extremely viciously good at hacking and reply to me when someone found 6.38 cfw at junaisyauqi@yahoo.com.au ok thanks in advanced
whenever someone finds hen for psp 6.37 or 6.38 e-mail me at kevinlevin@ymail.com and if anyone has working eboots send them to me
hi. i’m navneet i have a psp 3000 v 6.37. psp ka hack download kyse hoga my mobile 8146336666 or email navneetsingh0073@gmail.com
let me know when someone finds hen 6.37 or 6.38 tht work e-mail me at kevinlevin@ymail.com and send me some working eboots
wololo SIR i want to ask u that can u create a dax iso loader for 6.20 pro-b5? dax is a good compressed format of isoz. so plz reply. Thanks
i want to put an iso on my psp go what if the iso is bigger than 728mb will it still work or any other suggestions…i have ofw 6.37
anon can we play iso files while havin the ofw 6.37 ??? if its below 728mb did u try it?
it wont work only below 728mb and not all iso can run even they are below 728
i forgot you must to convert the iso to eboot using iso2eboot
help i need cfw 6.37
hey tells me the downgrader psp model is 5g and mentioned that has an error when running the eboot, I should do my psp Go, 6.39: S
@amin upgrade to 6.39 and use pro b6 hen or 6.39 tn hen http://wololo.net/talk/viewtopic.php?f=26&t=5152 or downgrade >
@Yoko load the latest downgrader from here http://wololo.net/talk/viewtopic.php?f=26&t=6403
YOKO , YOU CAN TRY WHIT TN 6.39 HEN NOW…
HI EVERYBODY IT’S NOW ALREADY, HEN 6.20 B7 6.35 B7 AND 6.39 B7 ON PSP-SLIMS YOU CAN FIND THE LINKS OVER THERE…
SORRY FOR DON’T PASTE HERE DIRECTLY…
GOD DAY.. FOR ALL
BEST REGARDS DEVS…
such dumbos
Well A bunch of you asked
How do we make A CFW??
or somthing along the lines of that.
once you have learned CSS and C++ AND (in some cases) HTML
THEN ask again.
Oh by the way Wololo.
Hi. i have visted your site for a long time and i have posted links on mine to yours (all though i dont get alot of traffic on my site)
I am 13
but i still need to get your permissions if i can post links and advertise your site?
I am currently having SEO done on my blog (my dad is president of a SEO company so i get it free if u want me to get your site up in google search and yahoo, bing ect.. just ask) And i was wondering is i could Advrtise your blog. free of course.Sorry but I am getting completely confused by all this info.
I have PSP 3004 with firmware V 6.37 datecode D1 and I have the feeling after reading info on this site that I can play Iso games on it. However I do not know how to manage; do i Need Half Byte Loader, e2boot, any Homebrew Enabler (HEN) or maybe something else ?
Can anyone please inform me what I best can do to play my favorite games. like Fifa and Need for Speed . And also what are the risks (apart from warranty void) of doing these changes to the product !Many thanks in advance
Ben
Seeing all your restrictions, limitations and concerns, I can advice to you to… buy the games you’re interested in.
Restrictions ?? I have a PSP and know a lot about software , but the problem is that I cannot find anywhere a good instruction about how to hack this PSP. I don’t want to brick it bij half-done CFW; it has to be good in one go . I have bought some games , but still want to something with Homebrew, at least because I don’t like to exchange the UMD every time I want to play something else.
Please give an answer on my question (s)
Half Byte Loader seems the easiest solution, bur I see some people writing about restrictions
Thanks a lot
Ben
If you know a lot about software, you should know that the best option is LCFW PRO 6.39. I think there is a version to 6.37. It’s compatible with a lot homebrew. My recommendation is to not use a permanent patch. You simply need to download the package (available anywhere) and run in your console (I believe it’s signed). So it’s child’s play…
Hey guys, i have a psp 3000 ver 6.37, i wana play iso’s on my psp, im pretty new at dis psp thng so i wana knw da easyst way to play iso’s n load a stack of dem so i dnt need my cd’s wit me all da tym
You need to get ready with your UMD. Then, install a custom firmware (PRO or ME for 6.37). Then, install a homebrew capable to rip your UMD (PSPFiler or ISO Tools will do the work). Run ISO Tools (or any other) to rip your UMD and you’re done.
Thanx man, do u knw any links wer i cn download dbz psp iso’s, im a big fan of animated fighting games lyb bleach, naruto, dbz…
To download? No, only to buy them…
help i had a psp 3000 5.03Gen-C then i upgrade it with 6.60 update on the official site of sony..now i cant see my games anymore, what should i do to make it work again..
There’s nothing you can do. You shouldn’t have upgraded, who tell you that? Probably there is a downgrader coming up, but until then, you should play your legal PSN games.
Oh, and there are other possibilities. Try the signed homebrews: http://wololo.net/talk/viewtopic.php?f=2&t=1879
and the new HBL: http://wololo.net/wagic/2011/08/15/release-hbl-118-for-ofw-6-60-grandpa-still-has-it/
Ok I have a PSP 1000 with 6.39 and have just use TN hen before I upgraded to play the FF Type-0 demo. What’s the EASIEST option for getting homebrew back for me now? Is there a way other then the above mentioned as that only talks about 3000′s and Go’s?
Scratch that last comment.
Hi Mr.Wolulu…
I have just Brought a used PSP 3000 Mystic Silver…which is having Its Firmvare 6.60 …. I am New in this and i dont know how the games work and how can we hack….Please just explain me Step By Step By which i would be able to do so…
I am Having Psp Mystic Silver 3003
Firmware Original 6.60…Please just let me know How To Hack and put games without Changing its firmware…..
Thanx in Advance….
This information is too old, there is cfw for 6.60 psp go to gbatemp.com in the community forums.
You dont need to downgrade here is the solution.
You must install the 6.39 versionhere is the link for normal psp http://www.fileserve.com/file/gBmKJamHere is the link for the pspgo eboot
http://www.fileserve.com/file/kb9JfN9And then when you have updated to 6.39 download this
http://www.megaupload.com/?d=UVVPUZTS
and remember to put the games into ISO folder.Bye. /m/
I HAVE A PSP3003 6.37. CAN SOMEBODY PLEASE ADVISE AS TO THE PROCEDURE TO EITHER UPGRADE / DOWNGRADE AND ALLOW CUSTOM FIRMWARE ETC TO BE LOADED AND HAVE ISOS PLAYED ON MY PSP PLEASE.
The downgrader just says curruptted data, I made sure it was in the GAME folder so I do not know what I should do.
silverdude first update to 6.39 or 6.60 firmware. than run a hen and than may downgrade. note: downgrade is a risk special 09g owner have problems to upgrade after downgrade. may 1st run pspeverest or pspident befor downgrade.
i have half byte loader on my psp and i put homebrew games in the game folder but how do i actually play them? i fallow it and it just sends me to the psp home i have a go does this effect it at all.
80 comments
Comments feed for this article
Trackback link: http://wololo.net/wagic/cfw-for-dummies-6-37-or-above-on-a-psp-go-psp-3000-or-ta88v3/trackback/