[Released] JigKick for PSP-2000 (TA-088v3 supported)

[ErikPshat]

Advertising

Added new video evidence of the service package JigKick on PSP-2006 TA-088v3!

Pandora (unbricker/downgrader) for the TA-088v3 PSP-200X.

Пандора (анбрикер/даунгрейдер для всех PSP-200X (включая TA-088v3).

Source: LINK REMOVED

This service is not a memory card piracy, since does not establish a pirate custom firmware.
It sets the official firmware 5.02 SONY
All files SONY no way been modified, and are in their original form they were originally.
In any case, the license agreement, we were not asked and we did not suggest any license conditions.

We only work has been done, to change the MSID in non-original cards Memory Stick (NoName).
But there is no interference and attempts to hack the original memory card SONY Memory Stick ™ is not provided.

[Valantin]

Advertising

in the msiddumper's source there are also functions for writing the sector of MS, but frankly I'm not going to try if the code works because I only have one ms and I'm not going to buy a second in case of problems XD

the inverse function of pspMsReadAttrB is missing.
should not be difficult to write, we write all of the functions they serve, but lacks the command to use it and do not know if there exists

probably the driver for the MS is the result of reverse engineering of sceSysregMs function

sorry for my bad eng

[m0skit0]

I removed the link. Please do not post any more links or I'll have to warn you. The problem with illegality is not modifying the firmware, but putting links to download software that's not publicly available by Sony. Those JigKicks are for private use by Sony Technical Service only.

[ErikPshat]

I removed the link. Please do not post any more links or I'll have to warn you. The problem with illegality is not modifying the firmware, but putting links to download software that's not publicly available by Sony. Those JigKicks are for private use by Sony Technical Service only.

Ok! Your position is quite clear to me.

[Harbin[G]er]

is there a way to softmod the memstick

[RaFa]

Hey guys, I read article that you can change the ID of microSD (with a PC tool) socan we use microSD (with changed ID) and microSD to pro duo adapter?

[gregorio]

Hey guys, I read article that you can change the ID of microSD (with a PC tool) socan we use microSD (with changed ID) and microSD to pro duo adapter?

No, msid located in the controller adapter. Change ID microSD don't work.

Sorry for my bad english...

[foxim8ly]

so how can you change MSID on SRC folders included?

[some1]

Why is changing the MSID needed? The 88v3 still loads ipl from ms without it, so I don't see why it is needed. Unless the files themselves does some type of check on the MSID?

EDIT:

Oh, sorry didn't see this before:

Decrypting JigKick 5.02

MemoryStick ID(msid) = key for decrypting *.enc files from JigKick

tag: 0x2D454353
key: 0x20, 0x4D, 0x53, 0x50, 0x53, 0x4E, 0x59, 0x30, 0x00, 0x78, 0x88, 0x84, 0xC6, 0xAA, 0x00, 0x00
scramble code range: 0x40 - 0x6F

That makes sense.

[gregorio]

Why is changing the MSID needed? The 88v3 still loads ipl from ms without it, so I don't see why it is needed. Unless the files themselves does some type of check on the MSID?

msid need to loading files