Advertising (This ad goes away for registered users. You can Login or Register)

How to install TN-X using US Tekken 2 exploit

Post here your guides, tips, how-to, etc...
ordi
Posts: 248
Joined: Sat Dec 29, 2012 6:53 pm
Location: Germany

Re: How to install TN-X using US Tekken 2 exploit

Post by ordi » Wed Apr 15, 2015 3:18 pm

1. Start VitaFTP on your Vita
2. You can see an address now, something like ftp://XXX.XXX.X.XXX/
3. Open the windows explorer, type the address in the address bar and press enter
4. You can see some folders now and inside the PSP folder there is the GAME folder
5. You have to copy homebrews and converted PS1 games to the GAME folder (it should look like this for example:
ms0:/PSP/GAME/suikoden/EBOOT.PBP(or rather FBOOT.PBP once you have copied the folder with the EBOOT.PBP)

If you want to play PSP ISOs you have to create a new folder in the root and call this folder ISO and you have to copy the ISOs to this folder. (it should like this for example: ms0:/ISO/VC3.ISO)

Oh, and when you use VitaFTP better set ''Enter Standby Mode'' to 30 Minutes (Settings->Power Save Setting), because it could cause some problems when the Vita goes in Standby Mode while you transfer something.

That's pretty much it. ;)
Advertising

TotalNoob_Vs_theZ
Posts: 6
Joined: Wed Apr 08, 2015 7:43 pm

Re: How to install TN-X using US Tekken 2 exploit

Post by TotalNoob_Vs_theZ » Wed Apr 15, 2015 5:40 pm

ordi wrote:1. Start VitaFTP on your Vita
2. You can see an address now, something like ftp://XXX.XXX.X.XXX/
3. Open the windows explorer, type the address in the address bar and press enter
4. You can see some folders now and inside the PSP folder there is the GAME folder
5. You have to copy homebrews and converted PS1 games to the GAME folder (it should look like this for example:
ms0:/PSP/GAME/suikoden/EBOOT.PBP(or rather FBOOT.PBP once you have copied the folder with the EBOOT.PBP)

If you want to play PSP ISOs you have to create a new folder in the root and call this folder ISO and you have to copy the ISOs to this folder. (it should like this for example: ms0:/ISO/VC3.ISO)

Oh, and when you use VitaFTP better set ''Enter Standby Mode'' to 30 Minutes (Settings->Power Save Setting), because it could cause some problems when the Vita goes in Standby Mode while you transfer something.

That's pretty much it. ;)
ok Ordi, i got it to work (actually it was before i saw your post here) using the "create folder PSP, then GAME" method where you transfer using Qcma. So i still havent given it a try with FTP yet.
will save your post in case i want to try the FTP in the future.
Thanks for your reply, really appreciate :D
Advertising

TotalNoob_Vs_theZ
Posts: 6
Joined: Wed Apr 08, 2015 7:43 pm

Re: How to install TN-X using US Tekken 2 exploit

Post by TotalNoob_Vs_theZ » Thu Apr 16, 2015 3:43 am

i have just one PS1 game that i played just the first 5 min, using TN X, game ran great
after i installed the game in TN-V, it asked me if i wanted to "delete" i confirmed and deleted. again, played normal in TN-X.
here is the problem, i went ahead and also deleted the game on my PC (the one you name all capital letters, CSO extension in savedata, where you also find 660.PBP) to save some space on my PC, but to my surprise i got a 'INITIAL SETUP" message once i triggered the exploit to start TN-V, so i had to, once again, name the PSP, connect to a network, set date and time... this is actually not the first time this "initial setup" screen comes up after i deleted some files, so here is the question

Am i not suppose to delete the game on my PC i just transfer to TN-V (the one with capital letters, CSO ext)??
because, if I am not suppose to delete it, my memory card will fill up pretty quickly right? its like i will be transferring the game to memory card over and over every time i have a new game going to the PSvita

thanks

Imnus
Posts: 8
Joined: Sun Mar 09, 2014 3:27 am

Re: How to install TN-X using US Tekken 2 exploit

Post by Imnus » Sun Apr 19, 2015 7:59 am

Arikdefrasia wrote:
Imnus wrote: Press X on the selected Game -> Black Screen -> after a couple seconds comes a prompt

--------------------------------------------------
Cannot access the memory card.

OK
--------------------------------------------------

It goes the same way for both 'Digimon World' and 'Metal Slug X'.
I haven't figured that part out yet. I get the same thing for all my ps1 games except psn store bought ones, I actually haven't touched my vita since since I didn't feel like figuring it out at the time.

Edit: From what I've been reading, you have to install the ps1 game through TN-V first to have it work on TN-X. So FTP transfer will not work.

This fixed it:
Alpmaster wrote:
Imnus wrote:Hi, I'm using a VITA (PCH-1000) with FW 3.01.


Press X on the selected Game -> Black Screen -> after a couple seconds comes a prompt

--------------------------------------------------
Cannot access the memory card.

OK
--------------------------------------------------

It goes the same way for both 'Digimon World' and 'Metal Slug X'.
Hi i had the same problem before it has something to do with the compression can not be 0 PSX2PSP
I compress completely you have to go into PSx2PSP settings and change compression to best.

One question: Can I use Numblast on OFW 3.18 to load eCFW TN-V11 or at least TN-V10 or is it only on OFW 3.36.

Ralph1611
Posts: 46
Joined: Tue Apr 21, 2015 3:18 am

Re: How to install TN-X using US Tekken 2 exploit

Post by Ralph1611 » Wed Sep 30, 2015 5:24 pm

The link on hack informer seems to be gone...

can someone please give me the save file fix?

Psvitero_32
Posts: 1
Joined: Sun Oct 04, 2015 7:04 pm

Re: How to install TN-X using US Tekken 2 exploit

Post by Psvitero_32 » Tue Oct 06, 2015 3:26 pm

Can someone upload the save file fix or provide me a link or a pastebin where i find it?
thanks in advance.

CanadianAidan
Posts: 5
Joined: Tue Nov 19, 2013 11:22 am

Re: How to install TN-X using US Tekken 2 exploit

Post by CanadianAidan » Thu Apr 07, 2016 8:25 am

I am also looking for the Qwikrazor Tekken 2 US savegame fix.

Unfortunately I managed to grab the game and original files at the time of release and only now discovered there was a need for a fix.

"SCEVMC0.VMP" to be exact.

All Google links are dead. Come someone host this please?

rakesh20
Posts: 1
Joined: Sun Jan 21, 2018 9:35 am
Contact:

Re: How to install TN-X using US Tekken 2 exploit

Post by rakesh20 » Sun Jan 21, 2018 9:45 am

thanks for the tutorial

Post Reply

Return to “Tutorials”