Advertising (This ad goes away for registered users. You can Login or Register)

Analog stick problem.

Everything that is PSP-related but doesn't go in any other subforum
JustAGuy29
Posts: 18
Joined: Fri Oct 20, 2017 11:53 am

Analog stick problem.

Post by JustAGuy29 » Mon Oct 23, 2017 12:10 pm

So I have a problem on my PSP 1000, sometimes the analog stick moves on its own.
Can I fix it without opening my PSP? I already tried blowing into it and the system information method but nothing seems to work, I also tried joysens it kinda worked but it made the moves weird.
Is there something else I can try?
Advertising

Butcher
Posts: 263
Joined: Mon Dec 12, 2016 11:58 pm

Re: Analog stick problem.

Post by Butcher » Mon Oct 23, 2017 8:51 pm

No u can fix it permnet its normal in psp if u use so much and after years will by broken "Will move in some position" the full fix is open PSP and reaplease joy to new ,temp u can use Macrofire plugin and in joy option manual change sensitive of that wrong side of joy ,fix small but no wortch of time - u need buy secend joy and thats all
Advertising

JustAGuy29
Posts: 18
Joined: Fri Oct 20, 2017 11:53 am

Re: Analog stick problem.

Post by JustAGuy29 » Mon Oct 23, 2017 11:50 pm

Well im in bad luck i guess.i will try macrofire see if that works.

JustAGuy29
Posts: 18
Joined: Fri Oct 20, 2017 11:53 am

Re: Analog stick problem.

Post by JustAGuy29 » Tue Oct 24, 2017 6:21 pm

I installed joysens again so far it worked.
Last edited by JustAGuy29 on Wed Oct 25, 2017 1:08 pm, edited 1 time in total.

Butcher
Posts: 263
Joined: Mon Dec 12, 2016 11:58 pm

Re: Analog stick problem.

Post by Butcher » Tue Oct 24, 2017 8:46 pm

Joysens is super old app prefer use macrofire have tons of option also joy sens and best to remap any psp kay to anotcher etc

JustAGuy29
Posts: 18
Joined: Fri Oct 20, 2017 11:53 am

Re: Analog stick problem.

Post by JustAGuy29 » Tue Oct 24, 2017 8:52 pm

I also found out that if I put a little pressure on the analog or the faceplate its stop moving.so maybe there's a screw that's loose and it doesn't hold the faceplate correctly.
Last edited by JustAGuy29 on Wed Oct 25, 2017 1:09 pm, edited 1 time in total.

JustAGuy29
Posts: 18
Joined: Fri Oct 20, 2017 11:53 am

Re: Analog stick problem.

Post by JustAGuy29 » Wed Oct 25, 2017 1:05 pm

I Installed Macrofire and changed the deadzone radius to 117(a little too much I know )and worked better than joysens,until I get my hands on a screwdriver for the psp i'll use this.

Butcher
Posts: 263
Joined: Mon Dec 12, 2016 11:58 pm

Re: Analog stick problem.

Post by Butcher » Wed Oct 25, 2017 8:00 pm

its temp fix better is reaplece joy - will old up next more couple of time using work less ok and some day will no any of macrofire settigs help. The joy is most on PSP usable part of PSP and super always damaging in PSP

User avatar
dmaskell92
Posts: 1135
Joined: Tue Mar 12, 2013 5:07 pm
Location: New York

Re: Analog stick problem.

Post by dmaskell92 » Thu Oct 26, 2017 8:57 am

Look, I've fixed more PSP's than I can count, it might not even be a issue with the analog but the rubber/copper contact under the analog. When it lifts your analog goes crazy, when it makes contact it's fine. This would explain why pressure is fixing it.

Here is an example link to show you what I'm talking about.

9/10 times a wonky analog is fixed by replacing the rubber contact. It might actually be fine after you secure the screw also.
Last edited by dmaskell92 on Thu Oct 26, 2017 9:06 am, edited 1 time in total.
Does it quit? If not, then it's legit... Too legit.

Nvidia Shield Portable 48gb
Dreamcast: SEGA Sports - 80gb IDE HDD
4k PS3 Super Slim OFW 4.82
1k PSP: 6.60 ME-2.3
1K PSVita: Ensō 32GB - 64GB SD2VITA - 64GB PSVSD
Image

JustAGuy29
Posts: 18
Joined: Fri Oct 20, 2017 11:53 am

Re: Analog stick problem.

Post by JustAGuy29 » Thu Oct 26, 2017 9:04 am

dmaskell92 wrote:Look, I've fixed more PSP's than I can count, it might not even be a issue with the analog but the rubber/copper contact under the analog. When it lifts your analog goes crazy, when it makes contact it's fine. This would explain why pressure is fixing it.

Here is an example link to show you what I'm talking about.

9/10 times a wonky analog is fixed by replacing the rubber contact.
Or maybe the rubber contact its moved out of place,i hope its not broken since i can't buy one.
Last edited by JustAGuy29 on Thu Oct 26, 2017 9:09 am, edited 1 time in total.

Post Reply

Return to “General”