[Release] VITAident - Identity tool for PS Vita

[Sindrik]

Initial release is up.

Change-log:

Code: Select all

- Displays ARM, BUS and GPU clock frequency.
- Displays battery life time.
- Displays battery percentage.
- Displays battery remaining capacity.
- Displays language.
- Displays firmware and model info.
- Displays PS VITA CID (Console ID).
- Displays battery temperature in both degrees C and F.
- Displays battery voltage.
- Displays SD free and total capacity. (Thanks TheOfficialFloW)
- Displays GPU Xbar clock frequency.

Download

working good, thx. You only need to correct a typo, Battery Reamaing

Battery Percentage says 4.0V on the PSTV, i have not tested it on a Vita

Advertising

[Joel16]

working good, thx. You only need to correct a typo, Battery Reamaing

Battery Percentage says 4.0V on the PSTV, i have not tested it on a Vita

My bad, kinda got the strings mixed up. I re-uploaded the release after making a few grammatical changes. Please re-download.

https://github.com/joel16/VITAident/releases

Advertising

[Sindrik]

working good, thx. You only need to correct a typo, Battery Reamaing

Battery Percentage says 4.0V on the PSTV, i have not tested it on a Vita

My bad, kinda got the strings mixed up. I re-uploaded the release after making a few grammatical changes. Please re-download.

https://github.com/joel16/VITAident/releases

working fine on the PSTV

is it normal that gpu clock frequency reports 0 MHz?

[Joel16]

working good, thx. You only need to correct a typo, Battery Reamaing

Battery Percentage says 4.0V on the PSTV, i have not tested it on a Vita

My bad, kinda got the strings mixed up. I re-uploaded the release after making a few grammatical changes. Please re-download.

https://github.com/joel16/VITAident/releases

working fine on the PSTV

is it normal that gpu clock frequency reports 0 MHz?

Yes that's normal. It returns 0 for some reason I don't know, but the Xbar frequency definitely returns a value.

Anyways time for another release. This seems stable enough to stay put for a while.

Screenshot

Changelog: v0.2

Code: Select all

- Displays PSID (Thanks SMOKE)
- Added automatic screenshot upon exit. (Heavily based off of Rinnegatamante's screenshot.c from rinCheat. so, thanks Rinnegatamante.) Note: The screenshot is saved under ux0:/data/VID000016/screenshots/
- Now displays MAC address properly.
- Now displays IP address.
- Minor code clean-up.

Download

[dobssy]

hi , a small suggestion , can you add a refresh button?

[Joel16]

hi , a small suggestion , can you add a refresh button?

Im pretty sure it should do that automatically. Have you checked to make sure if the battery percentage updates on its own? Or the battery life time perhaps.

[dobssy]

i checked before i posted.
it doesnt update automatically

[Joel16]

VITAident v0.3 is up. Sorry for the huge delay, I've been busy with my other projects.
Now there is also an alternate GUI version. (The GUI version updates values as you scroll through each section.) Check the screenshots below.

Changelog:

Code: Select all

- Now grabs username (PSN user id)
- Displays CEX/DEX/IDU/Debug/Tool info.
- Model identification (PS VITA/ PS TV).
- Hide certain info that isn't relevant to VITA TV.
- Display accurate version under app information.

GUI:
- Fixed controls.
- Displays sub section titles.
- L/R trigger can be used to cycle through sub sections.

Screenshots

Original:


GUI:

Download link (PS. If you're deciding to use the GUI version isntead, please download the VID000016.zip, and copy the folder VID000016 into your Vita's ux0:/data/)

[Joel16]

Can someone with a PS Vita OLED test this version:
https://drive.google.com/open?id=0BzIzE ... jNJczdsWEU

I'm trying to get the accurate model version (PCH-1000, PCH-2000, PS VITA TV)
So far I can confirm it properly detects my PCH-2000, I just need to make sure it works with PCH-1000 as well.

It should say Model Version: 0x00010000 (PCH-1000) on PS Vita OLED

[Rauliki]

My Oled Vita ident is 0x00010000