Question about the "PSP 3000 JigKick"

[The Z]

Never proved fake because nobody got it. And TA88v3 boots with normal pandora.

How should it put a 88v3 in service mode, without the verified IPL on a MMS?
Just a battery cant service mode a 88v3...

[Tipped OuT]

Never proved fake because nobody got it. And TA88v3 boots with normal pandora.

How should it put a 88v3 in service mode, without the verified IPL on a MMS?
Just a battery cant service mode a 88v3...

The battery puts it into "service mode" (PSP automatically turns on with a blank screen), but nothing can be done (running any form of code) without a compatible MMS , if I remember correctly.

[The Z]

Normal pandora does the same. It puts the psp into service mode, but without verified ipl you cant do anything.

[stevealexanderames]

a PSP is in service mode when it's forced to read the IPL from memory stick instead of the NAND, a simple pandora is needed for 2000v3 afaik. but i don't know/think that anyone has the 3000 MMS needed for unbricking...

[m0skit0]

a PSP is in service mode when it's forced to read the IPL from memory stick instead of the NAND

Not exactly "in service mode". It "boots in service mode" but since there's no compatible IPL for the new Pre-IPL, it does not "enter service mode".

but i don't know/think that anyone has the 3000 MMS needed for unbricking...

Sony.

[white_snake]

opps sorry it's ta-92 not ta-95,i downloaded the 6.60 CIPL switcher v3 and run to my psp and accidentaly i hit the x button in resulting into installing the original IPL and then there is a arrow,and 'BYE' under the arrowthat appear on my psp screen,and so on my psp screen turn to black screen and the flasher light not blink but has a power

[m0skit0]

I don't understand. Please use proper punctuation.

[ViP3R]

opps sorry it's ta-92 not ta-95,i downloaded the 6.60 CIPL switcher v3 and run to my psp and accidentaly i hit the x button in resulting into installing the original IPL and then there is a arrow,and 'BYE' under the arrowthat appear on my psp screen,and so on my psp screen turn to black screen and the flasher light not blink but has a power

i believe this:

[stevealexanderames]

opps sorry it's ta-92 not ta-95,i downloaded the 6.60 CIPL switcher v3 and run to my psp and accidentaly i hit the x button in resulting into installing the original IPL and then there is a arrow,and 'BYE' under the arrowthat appear on my psp screen,and so on my psp screen turn to black screen and the flasher light not blink but has a power

i believe this:

+1

i can't underatand why the hell one should want to try using a CIPL installer on a PSP 3000 or a Go ._.

[borisy]

I hate this kind of threads - they only give to people false hope. I bricked my psp by turning off the psp while downloading patapon 3 demo for Ps store (the psp was frozen so I had to remove the battery). Since then I've been lurking in some forums, hoping that someone will figure something out.