Page 1 of 1

Jailbreak PS3 4.82 [TUT]

Posted: Tue Dec 05, 2017 6:59 am
by Jw7123
A First confirm with MinChkVer PUP that your console is compatible.
If your console is Super Slim or if it shows a min version equal to 3.60 or higher, your console is NOT compatible, and you will brick your console if you continue with the following steps.
If it shows 3.56 or a lower version, you can continue.

B MAKE SURE that you put flsh.hex in the root of a pendrive and you inserted it in the port closest to the BD drive and that that the external device is visible on XMB on the music/video/picture column.
If the device does not show, the PS3 will freeze when you run the exploit. Restart the console and everything will be fine.
For a safest process, verify that the MD5 of flsh.hex on your USB is 8E156C99101BF36EC3EDB832982AE46D

C Server Setup:
1-Extract the zip file of NAND/NOR Writer for 4.82 in a folder on the desktop
2-Open the folder and create a new folder named: htdocs
3-Select the files "nand-482.html", "nor-482.html" and "xp_rel_writer10.js", CUT the files and PASTE them inside the folder htdocs
4-Run miniweb.exe server. Allow access it if your firewall prompts for it.
5- Access the server from the PS3 browser using the IP shown as host in the server window. Example:​

Or skip all these steps and simply use from the PS3 browser.​

D Set the url for the nand or nor html as home page of the PS3 browser, clean the cache, close the browser and open it again.

E Click the button and wait until the process complete and the PS3 shutsdown. It should take no more than 10 minutes. DO NOT STOP the process once it starts.

If it takes more than 10 minutes or show success without turn off, restart the console and repeat the process.

F If success, put any CFW 4.82 or Rebug 4.81.2 with Syscon 4.82 (See Next Tab for Additional Rebug CFW details) on PS3/UPDATE/PS3UPDAT.PUP in your usb drive an install it from XMB or recovery.

Remember to eject any DISC from the Bluray drive before install CFW.
Once in CFW, enable the QA Flags... it will be useful if you need to change CFW later.
Also install Rebug Toolbox and get your eid_root_key as one of the first things.
Create a new user without PSN and set it as default user. It will prevent accidental auto-login that could cause a ban from PSN.
Never login to PSN with syscalls enabled... Always use SEN Enabler, PSNpatch or webMAN MOD to disable the syscalls before play online.

Download Rebug ... hibobo.PUP

Download Write/Dump tools ... -zip.10125

Re: Jailbreak PS3 4.82 [TUT]

Posted: Fri Dec 08, 2017 9:07 am
by bananapie894
Thank you for such a nice detailed post.

Re: Jailbreak PS3 4.82 [TUT]

Posted: Wed Dec 13, 2017 2:53 am
by Jw7123
You are very welcome, check back on for news on your new jailbroken console.

Re: Jailbreak PS3 4.82 [TUT]

Posted: Sat Jan 13, 2018 1:34 pm
by Darton Staker
Hi there,

My playstation PHAT wont open the Server IP under the browser? Any reason for this? I only (80710102) error? Any help, I cannot access the part of the site to load the flsh.hex file? any help please!

Re: Jailbreak PS3 4.82 [TUT]

Posted: Sat Jan 13, 2018 1:36 pm
by Darton Staker
I was able to dump, but cannot access the site, I have setup the server (miniweb server) using windows 10, I have turned off my firewall, and I have typed in the IP address of the server, both using LAN and WIFI, with and without internet access. please help.

Re: Jailbreak PS3 4.82 [TUT]

Posted: Sun Mar 04, 2018 8:54 pm
by Butcher
Tray on anotcher PC ,Virtual machine or from mobile device