ATTENTION ON A PART OF THIS TUTORIAL YOU WILL GET A MESSAGE TO UPDATE, CLICK ON CANCEL
Downloads :
- Plugin netcheck_bypass:
https://mega.nz/#!b5IC1ZaL!NMEc2nVkYZz7 ... AfivhTO32g
- Config.txt:
https://github.com/yifanlu/netcheck_byp ... pass.suprx
- RegistryEditor:
http://aldezo.bplaced.net/henbrew/homeb ... EDIT01.vpk
Requirements:
-Latest Henkaku activated on vita.
-Vitashell 1.51 installed in vita.
-MolecularShell installed on vita.
RegistryEditor installed on vita.
Start:
Open vitashell 1.51 and enter usb mode by pressing SELECT, on the pc access the vita.
On your PC go to the folder ux0:TAI", inside tai paste the config.txt that you've downloaded.
Inside ux0:TAI folder you also put the netcheck_bypass.suprx.
Close VitaShell and open MolecularShell, inside MolecularShell press START, and click on reload taiHEN config.txt
Start RegistryEditor, and select "config", and then "NP". Inside NP click on enable_np: 0 and delete what's there and put 1 and then accept. NOTE: If the password section here is blank, you must fill it in with your account password.
Close RegistryEditor and turn off and then turn on the vita. Don't use a restart, as I've found that sometimes changes don't apply correctly during a restart.
Once the Vita starts, load Henkaku.
Open Settings and go down to PlayStationNetwork.
A MESSAGE TO UPDATE CONSOLE WILL POP UP. PRESS "CANCEL"
Once canceled click on System Activation, then Game, then Activate.
When you finish you will have the vita activated.
To finish, delete the netcheck_bypass.suprx plugin from the ux0 / tai directory with vitashell.
CONGRATULATIONS you can now install ARK or adrenaline in a psp game
Advertising