[Tutorial] Use PSVita as Controller & Gyro control for PC
Posted: Sat Feb 21, 2015 12:45 am
Welcome to my tutorial
Okay now lets get this straight
Video : Obtaining license and transferring the app to vita
1. Obtain your PSM Developer license : https://psm.playstation.net (May take days to be approved, be patient)
2. Download and install Latest PSM Studio software and app for your PSvita and PC : https://psm.playstation.net/static/gene ... k.html#sdk
3.Download this file : http://www.mediafire.com/download/4kpo2 ... -Alpha.zip and extract it
4. Open PSM Publishing utility on your PC
5. Go to key management, click 'generate publisher key' buttton (key with plus icon)
6. Enter any name
7. Enter your PSN login name that associated with psm developer license
8. Now register app key by clicking plus icon and browse 'app.xml' on the downloaded file and click OK
9. Conect your vita via USB and open PSM Studio app on your vita. Make sure your vita are connected to the internet too.
10. Go back to your PC and check if your vita are on the device list
11. Click 'update device seed and app key' and 'generate device seed' button
12. Now open PSM Studio on your PC, click File -> Open and browse for 'PSVPAD.sln' on the downloaded file .
13. After the project loaded, click Build -> Build all
14. Now click Run -> Runwith.. -> PSVITA. Your APP will be trasnfered on your PS Vita
15. Check your vita and your app will start, you dont need to do all of this again
Now how to setup your connection to your vita and pc
1. Make sure your vita and PC are connected on the same network / wifi connection
2. Now open PSVPAD Server application on your PC
3. Open your PSVPAD application on your vita and enter the desired IP address, click connect
4. If connection faIl, make sure you entered correct IP address and if necessary, disable firewall
5 Now get back to server application and make sure it says "CONNECTED" on the connection status and you're good to go
6. To enable gyro sensor. on your PSVPAD server, click configuration -> Check Axis Enabled and choose desired axis you want to enable (X Axis / Y Axis / Z Axis) tilt your vita to test it out
7. Have fun!
Okay now lets get this straight
Video : Obtaining license and transferring the app to vita
1. Obtain your PSM Developer license : https://psm.playstation.net (May take days to be approved, be patient)
2. Download and install Latest PSM Studio software and app for your PSvita and PC : https://psm.playstation.net/static/gene ... k.html#sdk
3.Download this file : http://www.mediafire.com/download/4kpo2 ... -Alpha.zip and extract it
4. Open PSM Publishing utility on your PC
5. Go to key management, click 'generate publisher key' buttton (key with plus icon)
6. Enter any name
7. Enter your PSN login name that associated with psm developer license
8. Now register app key by clicking plus icon and browse 'app.xml' on the downloaded file and click OK
9. Conect your vita via USB and open PSM Studio app on your vita. Make sure your vita are connected to the internet too.
10. Go back to your PC and check if your vita are on the device list
11. Click 'update device seed and app key' and 'generate device seed' button
12. Now open PSM Studio on your PC, click File -> Open and browse for 'PSVPAD.sln' on the downloaded file .
13. After the project loaded, click Build -> Build all
14. Now click Run -> Runwith.. -> PSVITA. Your APP will be trasnfered on your PS Vita
15. Check your vita and your app will start, you dont need to do all of this again
Now how to setup your connection to your vita and pc
1. Make sure your vita and PC are connected on the same network / wifi connection
2. Now open PSVPAD Server application on your PC
3. Open your PSVPAD application on your vita and enter the desired IP address, click connect
4. If connection faIl, make sure you entered correct IP address and if necessary, disable firewall
5 Now get back to server application and make sure it says "CONNECTED" on the connection status and you're good to go
6. To enable gyro sensor. on your PSVPAD server, click configuration -> Check Axis Enabled and choose desired axis you want to enable (X Axis / Y Axis / Z Axis) tilt your vita to test it out
7. Have fun!