Blackscreen on PSTV - TN-V11 - 3.20 - Numblast

[iCEQB]

Hi all,

I can't get the XMB to boot on my PSTV (3.20) with the Numblast exploit.
I used the files which were shared here on the forums in this Megapack.

It goes into the recovery menu w/o problems by holding R during the white / green splashscreen. I can also Install the 6.60 files and even launch my Recovery App (VitaFTP).

But whenever I try to boot into the XMB (let it be by autobooting / exiting recovery / recovery app / etc.) it just outputs a blackscreen.

I somehow have the feeling I did something wrong with the installation. I remember from previous installation that I only had to copy over the savegame folder for the game together with the 6.60 PBP to isntall the eCFW.
Why are there 2 folders now ? I have:

1) NPEG00011SAVEDATA <- Numblast exploit
2) TNV_54321 <- TN-V ??

Do I need to combine them somehow ? Like copy files over from one or another?
I have the 660.PBP and my RECOVERY.PBP in the 2) folder.

As I said, getting into the recovery works and also installing the 6.60 files. Even the FTP works (which is nice over ethernet btw ).
But for the lvoe of god I can't get the XMB to boot. Anyone knows what to do?

Thanks,
iCEQB

Advertising

[iCEQB]

It seems like some other had the same problem on 3.18 (which afaik is the same as 3.20?) but got it fixed with a specific set of files for Numblast:

viewtopic.php?f=52&t=42428

Funny thing is that zload is offline right now of course
Does anyone have these files somewhere?

Advertising

[iCEQB]

Sorry for the tripplepost but my hope is slowly fading away
I'm trying to identify the cause of this problem but I kinda reached a dead end.

Looking at the files I understand the following:

- "SAVADATA" inside the Numblast savefolder triggers the exploit and launches "H.BIN" (same folder)
- "H.BIN" launches "TN.BIN" in "ms0:/PSP/SAVEDATA/TNV_54321/TN.BIN"

As it seems, everything is working fine until this point, because the exploit gets triggered and I can enter the recovery menu. So the exploit itself is not the problem (which is good news imo, because I began to think that there are incompatabilites with 3.20).

Now the question is, what else might cause this problem?
I can't figure out what "FLASH0.TN" and "SECURE.BIN" do, but I don't think they are causing this issue?

I tried different versions of TN-V11, with different checksums on "TN.BIN" but there is no change to my problem
Some of these versions also come with a file called "DATA.BIN", again, dunno what it does.

I hope someone can help me figure it out

Thanks guys,
iCEQB

[iCEQB]

Ok I think I got my hands on the files mentioned in the post above from zload.net ... but of course it still doesn' work
I honestly don't know whats going on now and what to do next.

I uploaded all the different version in one pack so maybe someone smarter can figure something else out?

https://anonfiles.com/file/b962a84812be ... 9ffbd7574b

It includes 4 files:

"from zload.zip": The file mentioned in the post, every file in there apart from the "PARAM.SFO" matches from the archives "from big pack.zip" and "from hackinformer.zip". Strange thing is there seems to be a problem with the "PARAM.SFO". The PSTV shows me 100% progress that it copied everything to the memory card, but it doesn't show up in my storage management ????
Changing to another "PARAM.SFO" fixes this problem, but it still doesn't work.

"from big pack.zip": Contains the files which were posted here on the board in the All-in_one thread. The contents are the same as "from zload.zip" but with the correct "PARAM.SFO". Basically what I said above is alrady included in here.

"from hackinformer.zip": Contains the same files as "from big pack.zip" but sorted differently, basically only meant to update from a working setup if you had Numblast exploited before on 3.01 and updated to 3.36.

"from wololo.net": Contains the files from the TN-V11 download section here on wololo. All the files differ from the rest, but they still don't work.

Bottom line again:

All of them trigger the exploit correctly, I can enter the recovery menu, I can un/install the 6.60 files and I can launch my "RECOVERY.PBP" which is the VitaFTP and.

But none of these files let me boot into the XMB after installation. The screen just stays black but doesn't crash the PSTV. I also can't quit out of that screen, when I press the PS Button on my DS4, it shows this Stop sign in the upper left corner.

I hope we can figure t his one out

Regards,
iCEQB

EDIT: I rechecked the "ms0:/" contents via VitaFTP (which only works after isntalling 6.60 files - it even tells me to, upon trying to launch "RECOVERY.PBP").
I have 3 folders there: "flash" (seems to be the installed 6.60 files), "PSP" (all good in there) and one empty "temp" folder.

[HarmfulMushroom]

I never got it to work on my 3.20 ps tv but it worked as soon as I got it updated to 3.30

[iCEQB]

Well it works but it has to be a bug of some sort when it comes to loading the XMB.
And updating to 3.30 unfortunately is no option for me, because I'm using TN-X which doesn't work on this FW.

Who can be asked about this?
Is TN still around ?

[ordi]

Well, you can use VitaFTP, so you can set up a TN-V bubble (viewtopic.php?t=41122) instead of using the Numblast exploit.

[iCEQB]

TN-V seems to ahve a problem with FW 3.20, which is why even this bubble stuff won't work.
I'm currently hoping to TN to make a comeback and take a look at this.

[ordi]

No, TN-V works fine on my 3.20 PS TV.

edit: btw. have you tried to use TN-V 10 instead of 11? This could fix your problems...

[iCEQB]

Where can I get it?
TN-V10 doesn't seem to rely on the "TNV_54321" which H.BIN is looking for.

EDIT: For what game do you use TN-V ? And do you have the files handy? The core files always seem to be the same, so maybe I'm lucky with your version?