Help pls for smibrick 02g slim ta-85 v2

[edinho2010]

hi ppl , if any one can help pls

the kids of my friend did same thing to the psp 2004 e think this is a smibrick , it was on 3.71 me33 2 , it rum do all xmb operations but dont "load" any umd or iso, i think they bet into the recover menu and mess with same thing , my friend dont know and the kids don't say anything

it starts to load but get stop on the psp portable scream, its like its starts to load but miss same thing or operation to load the game.

i use RainsUltraLiteMMS500v1_2 and my Pandora bat. to reinstall the ofw , but its the same , dont load any eboot file. or umd
on service mode it all rum ok , but on xmb dont.

can any 1 help???
psp 2004
02g slim ta-85 v2

Advertising

[foxim8ly]

Sounds Like a Hardware problem, usually on that case, GPU is the cause of it.. need knowledge on HW repair

Advertising

[edinho2010]

Hi thank you for reply

i have the 500 ofw , do i have to install the 5.00 cfw and rum the recovery menu?

wot EBOOT.PBP do i have to put on recovery folder? ,

[edinho2010]

Sounds Like a Hardware problem, usually on that case, GPU is the cause of it.. need knowledge on HW repair

ok wot do you call gpu repair , gpu its on main board rigt ? , to repair it the best was change the mb ,? if a can get the gpu chip do replace i have the skills to do it.

i think maby its any prx or same thing like that its fault , the kids maby mess with any 1 of the flash , if i get an nand dump from the same model , if its possible, install it on this 1 , to have the flash ok and them go to the next step , cod this be ok ?

[edinho2010]

I was traing this from (TUT) PSP Semi Brick repair. "Direct to 5.00 M33-6" of TOcean

but wen i do "Run program at /PSP/GAME/RECOVERY/EBOOT.PBP" it dont do any thing the ms led blink for 2seconds then stop and dont do anything

only thing i can get work is with pandora , on that menu i can install the 5.0 ofw or 5.0 m33-4 with no problems , but the recovery menu dont work

Installation:

Download Recovery Flasher 1.60 and extract it.
Reboot your PSP in the Recovery Menu. (Press R-Trigger at startup)
Choose "Toggle USB"
Copy Recovery Flasher to your Memorysick.
Download OFW 5.00 and extract it.
Copy 500.PBP to your memorystick.
Choose now in the recovery menu "Run program at /PSP/GAME/RECOVERY/EBOOT.PBP"
Choose now "Yes, continue to program".
Choose now "Install M33 CFW (of version selected above)" (Image)
If something comes always choose yes.
Your PSP is flashing.
When completed press a button.
Congratulations your PSP is now unbricked.

edit:
on ofw if i try to load any Homebrew say data corrupt it ok , it runs mpg4 files mp3 files , only dont load games or eboot files, if i put an umd and boot the psp it gets stoped dont load the xmb , but the umd acts like its working

[foxim8ly]

As i had mentioned, its the GPU, A PSP will work fine on music,videos everything even without that part, except on running any homebrew or games...

To check if its the right thing, Run any game or homebrew then gently press and hold on left part (Left part, directional button) till u see the MS light blinks, it will now run the game... if it does, then thats what causes the problem

[edinho2010]

thanks for the replay, i have tray the left directional button trik, i was olding it for 15 min + - , and nothing append .

maby this is hope or not?

wot can i do mext?

can i install 1 nand dump.bin from other psp that have de same board?

[stevealexanderames]

thanks for the replay, i have tray the left directional button trik, i was olding it for 15 min + - , and nothing append .

maby this is hope or not?

wot can i do mext?

can i install 1 nand dump.bin from other psp that have de same board?

absolutely no, otherwise you'll have a permanent brick.

[edinho2010]

thanks stevealexanderames,

if tis not GPU problem wot can i do to get this thing working ?

well my friend get a portable mp4 and mp3 player lol

[foxim8ly]

Press it a bit harder , but not that hard coz it might break your SCREEN LCD...
or twist the whole thing gently until you see the MS light blnks....

if that works, HW Repair is the only solution, since i suspected ,you dont have ideas on HW repair, you might send it to Repair shop near you..

It can be repaired, thru Reheating the GPU IC...(by means of HOT AIR)..