Advertising (This ad goes away for registered users. You can Login or Register)

Hud v2.0/2.2 - Can someone upload the hud.cfg file Only please

Most of the homebrews discussed in this forum can be downloaded here
Post Reply
tomsmith11
Posts: 4
Joined: Mon Nov 27, 2017 4:25 pm

Hud v2.0/2.2 - Can someone upload the hud.cfg file Only please

Post by tomsmith11 » Sun Mar 04, 2018 1:39 pm

Hi,

I need someone with a working PSP (any) to kindly upload the hud.cfg file for me on this plugin: (This was the only place where I could download this plugin as all other download links are not working no more.) Either version 2.0 OR 2.2 is okay any if fine for the config file.

HUDv2.0 INFO:
http://www.consolespot.net/forums/psp-n ... 2-0-a.html

DOWNLOAD HUDv2.0:
http://www.consolespot.net/forums/attac ... ud_v20.zip

Either the hud.cfg file is fine OR the full text displayed here as a post would be fine too.(but I would prefer the original hud.cfg file instead :) )

WHAT TO DO:

Please run the plugin on your PSP, then turn on FPS counter as example, then close the menu that way it will produce a hud.cfg file in your SEPLUGINS folder.

OR change the button config for me, so in this case instead of the below:

Default button setup is:
- NOTE+LTRIG to access configuration menu.
- NOTE+RTRIG to turn HUD completely ON/OFF.
- NOTE+UP to take a screenshot

CHANGE TO THIS SETUP:
Can someone change the button config for me to the following please:

NEW button setup is:
- SQUARE+LTRIG to access configuration menu.
- SQUARE+RTRIG to turn HUD completely ON/OFF.
- SQUARE+UP to take a screenshot

I need this so I can change the button configuration on my PSP, as my NOTE button does not work :(.

Thank you
Advertising

User avatar
fate6
Big Beholder
Posts: 7602
Joined: Fri Mar 09, 2012 1:18 am
Location: [fate6@Canterlot ~]$

Re: Hud v2.0/2.2 - Can someone upload the hud.cfg file Only please

Post by fate6 » Sun Mar 04, 2018 7:13 pm

Changed "NOTE" to "SQUARE" and enabled FPS while disabling the rest.
Advertising
Attachments
PSP-HUDv2.0_CFG.rar
(125 Bytes) Downloaded 29 times
Image
anon wrote:If you can't trust a 600 year old vampire in a prepubescent girl's body, who can you trust?

tomsmith11
Posts: 4
Joined: Mon Nov 27, 2017 4:25 pm

Re: Hud v2.0/2.2 - Can someone upload the hud.cfg file Only please

Post by tomsmith11 » Sun Mar 04, 2018 7:42 pm

fate6 wrote:
Sun Mar 04, 2018 7:13 pm
Changed "NOTE" to "SQUARE" and enabled FPS while disabling the rest.
Hey Fate Thank you for the file :).

But I am truly sorry I just noticed I made a mistake hence would you please be able to do it like this:

NEW button setup is:
- SQUARE+DPAD LEFT to access configuration menu. << THIS ONE
- SQUARE+RTRIG to turn HUD completely ON/OFF.
- SQUARE+UP to take a screenshot

Sorry about that, I just can not access the menu with the trigger, I disabled everything but no luck, wont work with SQUARE>LTRIGGER

Butcher
Posts: 317
Joined: Mon Dec 12, 2016 11:58 pm

Re: Hud v2.0/2.2 - Can someone upload the hud.cfg file Only please

Post by Butcher » Sun Mar 04, 2018 8:46 pm

U have her latest version: http://psp.scenebeta.com/noticia/psp-hud

Also why do u dont use program to remap buttons http://psp.scenebeta.com/noticia/macrofire

Then map any kay or combination to not working NOTE button then use it like was NOTE and in program normal load and change settings in HUD next to some anotcher button

I use on my 1xPSP2004 macrofire to map R Trigger becouse is when buayed that PSP for supper chip was damaged and no way to fix witchout replese soem inside psp ,like UMD not worked in it)

Or wait untill some one map in HUD for u CFG


By Macrofire u can also fix no working NOTE button example remap it to Brightnes+START and will work like NOTE

tomsmith11
Posts: 4
Joined: Mon Nov 27, 2017 4:25 pm

Re: Hud v2.0/2.2 - Can someone upload the hud.cfg file Only please

Post by tomsmith11 » Sun Mar 04, 2018 9:15 pm

Butcher wrote:
Sun Mar 04, 2018 8:46 pm
U have her latest version: http://psp.scenebeta.com/noticia/psp-hud

Also why do u dont use program to remap buttons http://psp.scenebeta.com/noticia/macrofire

Then map any kay or combination to not working NOTE button then use it like was NOTE and in program normal load and change settings in HUD next to some anotcher button

I use on my 1xPSP2004 macrofire to map R Trigger becouse is when buayed that PSP for supper chip was damaged and no way to fix witchout replese soem inside psp ,like UMD not worked in it)

Or wait untill some one map in HUD for u CFG


By Macrofire u can also fix no working NOTE button example remap it to Brightnes+START and will work like NOTE
Hey Butcher,

How do I use the Macrofire ? I have no idea how to assign the buttons and edit the files? any idea can you perhaps make the files for me or something then all I have to do is just place them into the folder and it should work?

I never knew a newer version of HUD was available thanks I'll update it now, but wont be able to access it until I have a work around the NOTE button.

I need help :/


EDIT: No above does not work, only way I can do this is the config file, but its not picking up the remapped menu button done by Fate.

User avatar
fate6
Big Beholder
Posts: 7602
Joined: Fri Mar 09, 2012 1:18 am
Location: [fate6@Canterlot ~]$

Re: Hud v2.0/2.2 - Can someone upload the hud.cfg file Only please

Post by fate6 » Mon Mar 05, 2018 3:22 am

Changed Ltriger to Dpad Left.
Attachments
PSP-HUDv2.0_CFG.rar
changed a left trigger to left dpad
(126 Bytes) Downloaded 43 times
Image
anon wrote:If you can't trust a 600 year old vampire in a prepubescent girl's body, who can you trust?

Butcher
Posts: 317
Joined: Mon Dec 12, 2016 11:58 pm

Re: Hud v2.0/2.2 - Can someone upload the hud.cfg file Only please

Post by Butcher » Mon Mar 05, 2018 9:25 pm

tomsmith11 wrote:
Sun Mar 04, 2018 9:15 pm
Butcher wrote:
Sun Mar 04, 2018 8:46 pm
U have her latest version: http://psp.scenebeta.com/noticia/psp-hud

Also why do u dont use program to remap buttons http://psp.scenebeta.com/noticia/macrofire

Then map any kay or combination to not working NOTE button then use it like was NOTE and in program normal load and change settings in HUD next to some anotcher button

I use on my 1xPSP2004 macrofire to map R Trigger becouse is when buayed that PSP for supper chip was damaged and no way to fix witchout replese soem inside psp ,like UMD not worked in it)

Or wait untill some one map in HUD for u CFG


By Macrofire u can also fix no working NOTE button example remap it to Brightnes+START and will work like NOTE
Hey Butcher,

How do I use the Macrofire ? I have no idea how to assign the buttons and edit the files? any idea can you perhaps make the files for me or something then all I have to do is just place them into the folder and it should work?

I never knew a newer version of HUD was available thanks I'll update it now, but wont be able to access it until I have a work around the NOTE button.

I need help :/


EDIT: No above does not work, only way I can do this is the config file, but its not picking up the remapped menu button done by Fate.
Macrofire work - i use it on 1 psp allways - simple u do in PSP or in REMAP.ini file manual on PC then copy to PSP and will load this likedefult config .

Simple if u need tutorial is many on Youtube good that show what is what to do.

By this u can do that use MAcrofire to map NOTE to somthing anotcher button go to HUD change like was normal NOTE work.

Post Reply

Return to “Homebrews”