Advertising (This ad goes away for registered users. You can Login or Register)

CoderPR & NitePR Simple Tutorial

Unleash the full power of your PSP with a Custom Firmware.
Download and installation tutorial at http://wololo.net/wagic/cfw4dummies
Sick Boy
Posts: 11
Joined: Wed Dec 29, 2010 12:23 am

Re: CoderPR & NitePR Simple Tutorial

Post by Sick Boy » Wed Dec 29, 2010 12:42 am

Phillyphries wrote:Probably a security measure. Make sure that you have the hacks off until you enter the room you want to play. If you have the hacks on while logging on, for example the User Agreement Screen, the 1.6 patch will detect and boot you off with an extra psp freeze. However, once you get to the room, apply the NEW 1.6 codes. Delete the original Socom FTB2 codes that NitePR comes with and make a new one. Hope I helped. :)
Thanks but what i was referring to was at the very beginning in the XMB. when you click to run the UMD in the XMB it starts normally but right where the game is booting and the loading screen shows up, my psp freezes. it shows the NitePR message for a very short time and it freezes.

basically i cant get into the game at all.
Advertising
PSP 2000 TA-088 v1/v2, FW 6.20 TN-B(HEN), HBL R109

Help Needed: Socom FTB2 not working with NitePR/CoderPR
PM me if you know something about this.

Phillyphries
Posts: 521
Joined: Tue Dec 21, 2010 8:40 am

Re: CoderPR & NitePR Simple Tutorial

Post by Phillyphries » Wed Dec 29, 2010 2:08 am

Sick Boy wrote:
Phillyphries wrote:Probably a security measure. Make sure that you have the hacks off until you enter the room you want to play. If you have the hacks on while logging on, for example the User Agreement Screen, the 1.6 patch will detect and boot you off with an extra psp freeze. However, once you get to the room, apply the NEW 1.6 codes. Delete the original Socom FTB2 codes that NitePR comes with and make a new one. Hope I helped. :)
Thanks but what i was referring to was at the very beginning in the XMB. when you click to run the UMD in the XMB it starts normally but right where the game is booting and the loading screen shows up, my psp freezes. it shows the NitePR message for a very short time and it freezes.

basically i cant get into the game at all.
Try dumping it into an iso and run it with Prometheus and see if that helps.
Advertising
My CWCHEAT 6.20TN-A Tutorial
viewtopic.php?f=17&t=972
CoderPR & NitePR 6.20TN-A Tutorial
viewtopic.php?f=17&t=1054

HomebrewEnabler
Banned
Posts: 658
Joined: Thu Sep 30, 2010 12:45 pm

Re: CoderPR & NitePR Simple Tutorial

Post by HomebrewEnabler » Wed Dec 29, 2010 8:44 am

Phillyphries wrote:
HomebrewEnabler wrote:i have mohh too. lol whats the note button? :lol:
The button you use to enable the equalizer or mute the psp. "?"
yea when i choose my cheats for medal of honor heroes 1 and press note button to enable them it freeze my psp! :( please help

Phillyphries
Posts: 521
Joined: Tue Dec 21, 2010 8:40 am

Re: CoderPR & NitePR Simple Tutorial

Post by Phillyphries » Wed Dec 29, 2010 8:49 am

HomebrewEnabler wrote:
Phillyphries wrote:
HomebrewEnabler wrote:i have mohh too. lol whats the note button? :lol:
The button you use to enable the equalizer or mute the psp. "?"
yea when i choose my cheats for medal of honor heroes 1 and press note button to enable them it freeze my psp! :( please help
Probably bad codes. Remember you need to look for the most recent cheats, and make sure they are for your region, because it doesn't work if you take Europe cheats and put it in your .txt if you play the American version.
My CWCHEAT 6.20TN-A Tutorial
viewtopic.php?f=17&t=972
CoderPR & NitePR 6.20TN-A Tutorial
viewtopic.php?f=17&t=1054

The Salty Dalty
Posts: 55
Joined: Sun Dec 26, 2010 10:46 pm

Re: CoderPR & NitePR Simple Tutorial

Post by The Salty Dalty » Fri Dec 31, 2010 7:39 am

Is the version of coderpr you provided edited in any way for the hen or are they the normal versions. Just want to know because it isn't working on 5.03 gen-c and I want to know if I should download again from somewhere else.

Phillyphries
Posts: 521
Joined: Tue Dec 21, 2010 8:40 am

Re: CoderPR & NitePR Simple Tutorial

Post by Phillyphries » Fri Dec 31, 2010 8:28 am

The Salty Dalty wrote:Is the version of coderpr you provided edited in any way for the hen or are they the normal versions. Just want to know because it isn't working on 5.03 gen-c and I want to know if I should download again from somewhere else.
It probably is edited, but I didn't make it so I really wouldn't know, but some claim they have it working, so. I just know that it doesn't work on my Go.
On the otherhand, I've tested NitePR and it works like a dream on my PSP Go.
My CWCHEAT 6.20TN-A Tutorial
viewtopic.php?f=17&t=972
CoderPR & NitePR 6.20TN-A Tutorial
viewtopic.php?f=17&t=1054

cyberwol
Posts: 34
Joined: Sun Dec 26, 2010 6:02 am

Re: CoderPR & NitePR Simple Tutorial

Post by cyberwol » Sun Jan 02, 2011 7:34 am

Tried it on MGS PW .Got thr right region codes and everything.

On the top left of the screen it says,
coderPR - On Standby
Never does it say press home button twice to enable!

MaX_SLayeR
Posts: 256
Joined: Sat Oct 02, 2010 12:20 am
Location: California
Contact:

Re: CoderPR & NitePR Simple Tutorial

Post by MaX_SLayeR » Sun Jan 02, 2011 7:37 am

cyberwol wrote:Tried it on MGS PW .Got thr right region codes and everything.

On the top left of the screen it says,
coderPR - On Standby
Never does it say press home button twice to enable!
Because it's a NitePR mod... you still have to press home twice.
Hacking & getting homebrew on your 3.55 PS3
sonnyz wrote: I paid $500 for my PS3 and if I decide I want to use it to play pong then I'm gonna play some **** pong. Understand?

Phillyphries
Posts: 521
Joined: Tue Dec 21, 2010 8:40 am

Re: CoderPR & NitePR Simple Tutorial

Post by Phillyphries » Sun Jan 02, 2011 7:38 am

MaX_SLayeR wrote:Because it's a NitePR mod... you still have to press home twice.
... Thank you. I was about to rip my hair out.
My CWCHEAT 6.20TN-A Tutorial
viewtopic.php?f=17&t=972
CoderPR & NitePR 6.20TN-A Tutorial
viewtopic.php?f=17&t=1054

cyberwol
Posts: 34
Joined: Sun Dec 26, 2010 6:02 am

Re: CoderPR & NitePR Simple Tutorial

Post by cyberwol » Sun Jan 02, 2011 8:04 am

MaX_SLayeR wrote:
cyberwol wrote:Tried it on MGS PW .Got thr right region codes and everything.

On the top left of the screen it says,
coderPR - On Standby
Never does it say press home button twice to enable!
Because it's a NitePR mod... you still have to press home twice.

Thanks[Also how do I add rep/Thank a post on this forum!]

And once I get into the menu,I enable the cheats I want!
However the top of the screen still shows all cheats are off.

I am not able to change it with any key combination!

Post Reply

Return to “Custom Firmwares (HEN/CFW/LCFW)”