Upgrade from Rogero 4.30 to 4.40 and dehashing

[mschumacher69]

I see. Im going with rebug then. Anyway, I made a dump and validated using this guide: http://www.ps3devwiki.com/wiki/Validating_flash_dumps

Anyway, everything seemed fine, but when I used BwE (http://betterwayelectronics.com/files/B ... idator.rar), it showed me 2 dangers.

Am i to be worried? Does BwE works on Rogero 4.30 (my current CFW) ? Thanks in advance.

Don't worry about it, the dump is just a precautionary measure in case of a highly unlikely brick. Rebug is known to be reliable and you wouldn't brick your PS3 when installing it unless say there's a power outage when flashing.

Just follow my guide and you'll be fine.

Advertising

[arthanis]

Don't worry about it, the dump is just a precautionary measure in case of a highly unlikely brick. Rebug is known to be reliable and you wouldn't brick your PS3 when installing it unless say there's a power outage when flashing.

Just follow my guide and you'll be fine.

Yeah, but thats exactly what Im afraid of. I would like to have a good dump before trying to update.

Advertising

[mschumacher69]

Connect your PS3 to a UPS when flashing then if you know that your area has regular power outages.

Flash dumps using software (like mM or the Rebug Toolbox) are usually valid and don't need verification. Also, if you validated using the ps3devwiki guide, then you should be fine.

[arthanis]

I followed your guide and everything went smoothely. Thanks a lot.

[mschumacher69]

You're welcome!