Help, My PSP with mobo TA88V3 birck when install GEN D

[wololo]

For the discussions just google "unbrick TA88V3"

...which will probably get nothing but fakes or really low-level discussions with no practical solution. It is not publicly known how to unbrick these motherboards today.

[Saint]

No it gets "You are an idiot" quotes but it does find some discussion about switching mobo's, atleast i came across it, just remember as for now THERE IS NO FIX!! so everything you read about a fix is a fake.

[chrish4161]

Before you doing this again, Just read the manual of it and try it step by step, as written into it. It will definitely worked. If still this problem occurred then search this problem on the Google. That is the best solution. And if you really have a bed luck then pack it as it was and send it back to the dealer. That can be any technical problem. Or the best solution is "tell your dealer to setup this program." there you can catch the problem.

[Saint]

Before you doing this again, Just read the manual of it and try it step by step, as written into it. It will definitely worked. If still this problem occurred then search this problem on the Google. That is the best solution. And if you really have a bed luck then pack it as it was and send it back to the dealer. That can be any technical problem. Or the best solution is "tell your dealer to setup this program." there you can catch the problem.

He just screwed up flashing a yet unflashable board no steps you can take it just won't work just yet.

[cha]

my psp has it with 6.20 with half-byte loader