TN-V11 Bubbles for Firmware 3.36 and a Brand New Exploit Game for 3.50 Released
You saw that coming, didn’t you? Leaked TN-V11 files finally made it to a bubble and we got a brand new exploit game. You are in for a treat.
Qwikrazor87 leaked TN-V11 a few hours ago. After that Total-Noob responded by leaking two kernel exploits. What a day. Now Qwikrazor87 posted the needed files for doing your own TN-V11 bubble for firmware 3.36
First, sign the TNV.ISO file with fake_np with your base game. There are several tutorials on how to do that, all using the public bubbles method by mr.gas and Tomtomdu80. After that transfer the TNV_54321 folder to /PSP/SAVEDATA folder and you are done.
I love it pic.twitter.com/XyWCnX1lMa
— Level Three (@level3tjg) April 18, 2015
Qwikrazor87 didn’t stop and released TN-V11 files for several games for 3.36/3.50. Here are the released save files for 3.36/3.50 so far. If i were you, i would just setup a custom bubble after using the save files once. Of course that is if you are on 3.36.
And here is the 3.50 files for Pool Hall Pro/World of Pool. You won’t be able to setup bubbles for this as the only public custom bubble method has been patched for 3.50.
And here is the real deal. A brand new exploit game which works on both 3.36/3.50 and doesn’t need a 2nd hacked device. To trigger the game exploit: Start game > load game > load > first entry > press X.
Ape Escape: On the Loose (US only) 3.36
Ape Escape: On the Loose (US only) 3.50
Needless to say, you can make a custom TN-V11 bubble out of it if you are on 3.36.
Also, you must have noticed i am running TN-V11 on a 3.18 PS Vita. It is only for demonstration purposes. So far, i haven’t seen any improvement over TN-V10 in my setup. On the contrary, TN-V11 failed to boot my FBOOT.PBP files unless i renamed them to EBOOT.PBP via dot trick. TN-V10 was totally fine with them. So, if you are on 3.18 or below, just continue to use TN-V10 as this release (or should say this leak?) isn’t intended for you.
SOURCE: qwikrazor87 on twitter
Do the dinosaur
Great news!
(Wheoo – Wheoo) Grammar Nazi alert! You need to capitalize your I’s mate.
Grammar police alert*
*here are
Yup, it just slipped.
what exactly is this dot trick for renaming? and can i use it so i can actually run homebrew via ape escape 3.50 TNV? because at this point only .iso files are working for me and any method of installing E/F/V/BOOT.PBP files fails.
Rename tricks are fixed on 3.50.
Damn. Thanks.
does this work on 3.50PSTV? I was tempted to update my 3.18PSV but then I readi there is not much difference between TNV10 n TN!11.
Nope, TN-V11 isn’t worth updating for now.
Fuuuc- I’m broke now and of course there is a one divice exploit now.
So for World of Pool 3.50 do we have to do the wifi trick?
Yes. It still requires the second device & the trick (WoP).
Thanks for the quick update, I might as well get Ape Escape then.
*** I got like $7.32 left after the sale.
The Numblast files say to replace the “old H.bin” but what savedata should we be starting from? 3.01 TN-V? 3.36 ARK-2? Or a fresh savedata?
TO ALL THE NUMBLAST USERS:
-Delete the NPUG80320KEXPLOIT (or something similar)
-Copy the the H.bin to the other folder you should have (NPUG80320SAVEDATA)
-Download the 660.PBP (is on theTNV tutorial) and copy to the TNV_54321 folder
-Transfer both folders to the vita (TNV_54321 and the save)
-Use Qcma to the transfer, I try opencma and dont work
-Eject the game, hold R and install the 6.60 file (Advanced option)
Sorry for the english.
I wish native English speaking users, who know how everything works, were the ones to write English tutorials… There would be a lot less confusion and stupid posts.
How do I download the game without updating to 3.50?
Download game from PS3 and transfer it to your PS Vita.
If you don’t have a PS3, another option is VitaUpdateBlocker:
http://wololo.net/2014/03/31/how-to-and-review-iamghosts-vitaupdateblocker/
Note: reports seem to indicate that it only works on 3.36, and not 3.18 or older.
dont work 3.36
it DOES work on 3.36
yes please anyone know how to download ape escape on 3.36 without upating….i tryed the download through the playstaion store with the queue trick and i have not been able to get it to work.
vitaupdateblocker
the tutorial text really needs to be worded better it is very minimalistic and doesn’t explain what to do very well I THINK I’ve done what it says by replacing the H.bin in the old PHP save with the new one and then transferring over the TNV_54321 but then I just keep getting a green screen everytime with error C1-2858-3…I am on 3.50
You are using a second hacked device right?
yes the same device that works for the ARK version
You copied the 660.PBP to TNV folder and hold the R button while booting right?
yes I have 660.PBP in TNV_54321 and hold R but it just stays at the green screen until I receive the error
Hi ! Thank for everything !
I remarked that OpenCMA doesn’t want to transfert TNV_54321 (I’m on 3.36 so I saw it with PSPFiler). Please consider trying QCMA. Personnally I put it with the FTP and it was all right.
Before sending TNV_54321 to your Vita, don’t forget to put the PSP Firmware into it (follow the link in the description in the TN-V11 download page, don’t forget to rename it 660.PBP).
Then you get the white screen, HOLD R,green screen, then in the menu go to “advanced” and “install 660”.
At last, it works great !
I try to load the save file, my screen goes grey for awhile then I get error C1-2858-3. I am on 3.50. Is anyone else having this issue?
I am also getting this error. I do not know the cause
Same here. I have yet to find a fix. I’ll keep looking though!
gotta say. even with the dirtyness going on, gotta love the scene
been waiting on a CEF for 3.36 for a while
but at the same time it makes custom bubbles useless (except for the one launching TN-V)
though using TNV shows a lot of bloat from using custom bubbles as in there are like 4 copies of say pspfiler, emulator 1, emulator 2. etc etc.
still really nice though
So I can just do the same with PSPfiler to install this right? 😀
Yes it isnt working for me either grey screen then error.
As much as I am grateful for the opportunity and the hard work which went into these exploits, I regularly get a gray screen with no progress. I got it on that last exploit requiring a second hacked game, and I got it with this one.
I also only get a blank gray screen. I spend money on these exploits and they don’t work for me. May I request feedback on how to resolve this please? Thank you in advance.
I GOOGLED the exploit and found this; https://www.youtube.com/watch?v=f4YIqEopQNQ
and this brought me to all the links. I got the exploit working on 3.50 (thank you). got my PSP games back! this is very exciting.
I get the same error you guys are getting an on 3.50
I can do the pspfiler thing the zett always does right?
3.50 h.bin in wop AND 660.PBP IN TNV54321
PSPGO 5g 6.20 pro-b10 ps vita WOP error ?
Where i can find a better guide for installation, i am a tootal noob for this :). This is my first time to hack a vita
If someone gets this one working well on 3.50 with their vita, please let me know here. Kinda broke at the moment so Im debating on such a small purchase of 8 bucks. (ape escape). Atleast those raw tiger shrimp I have will make me feel a lil less poor :->
By using Ape Escape on 3.50, installing 6.60 files failed: “Error…openning 660.PBP 🙁 Help please!!
Forget to put 660.PBP into TNV_54321 folder?
Use QCMA to copy files, fixes error.
YES! Thank you! QCMA copied the TN-V files properly and was finally able to get into recovery to install 6.60.
how install Ape Escape: On the Loose (US only) 3.50?
Is there a video tutorial?
I’m also waiting for it… 😀
Buy the game on the psn store, thats the “ONLY WAY” to install it on your PS Vita!!
All we can do at the moment is to wait for The Zett to post a video tutorial about this. I too keeps getting error. Have patience!
Thank you soooooo much, everything is working!!!!
Can you share how did you do it? If its not to much to ask?
Thanks so for 3.50 i can only access it using the exploit? how can i transfer files let say PS1 games to TN-V?
Yes, you can’t make a bubble on 3.50. You can transfer files via FTP or savegame install.zip method.
i cannot find world of pool EU and Ape Escape 🙁
Would like to ask; I have Hot Brains in my PS Vita and it uses ARK-2 at the moment. Is it possible if I “uninstall” the ARK-2 and “install” TN-V11? Please response as I really want to know about it.
1. Download QCMA – http://wololo.net/downloads/index.php/download/8241
2. Download FW350_APE_US_TNV11 – https://0904e715411f2fd4035a62130168d72e73548773.googledrive.com/host/0BwYVUA7ansC5cnhxQmtoNnY2RWc/FW350_APE_US_TNV11.zip
3. Extract it and Copy these files to Vita folder on your Pc.
4. Put 660.pbp in TNV_54321 folder.
5. Trasfer TNV_54321 and UCUS986090000 to your vita via QCMA
6. Run game and enjoy it.
sorry for the noob question, but how do I xfer the TNV+UCUS files via QCMA, I am able to backup from psvita > PC but don’t know how to do it the reverse way. Cheers in advance.
nevermind! I found out haha
Anyone getting the error on 3.50. Download http://zload.net/v2/archives/file/?id=2417996
The Zett included a second .txt file, that, if you follow it to the letter, and use QCMA to load the save data as opposed to CMA or OpenCMA, it will work correctly. Make sure to hold down R when the exploit loads. Works for me anyway, and I was getting the error, on 3.50.
Why I cannot download Hot Barin from PSN Store? I bought it but I cannot download it through PS3, when I click Download, nothing happens.
Has anyone managed to make a custom bubble of this exploit? If so, can you provide a step-by-step procedure on how?
you can’t make a custom bubble on 3.50. If you are at 3.36 or below, i caqn recommend this tool and the link to tnv.iso in the article. http://wololo.net/talk/viewtopic.php?f=20&t=42042&p=383514#p383514 use fakenp mode.
Is there any chance that I will still be able to get the EBOOT.PBP of my bought PSN game Pool Hall Pro if it is no longer in US PSN? I just noticed that it got already removed just now…
you can get it from your Vita via FTP. though it is slow.
I had the game already installed in my PSV unit. How do I go about that? I was quite relieved knowing I could still get its eboot.pbp file by extraction.
I have a slim with 3.15 totally stock, running a game via a game card and not signed in to PSN. vita update blocker is not working and I don’t know how to proceed. can anybody help with some pointers?
Use a ps3 to sign into PSN and sideload an exploit game to your Vita. Refer to tutorials section at /talk for more info.
when i connect my vita top my pc.. it gives me error
yeah !! It works now.. Ape Escape: On the Loose for 3.50 😀 thanks
If you get problems with Ape Escape, read this post please. http://wololo.net/talk/viewtopic.php?f=56&t=42433 also 660.PBP is required for booting TNV.
So can anyone point me in the right direction as to how to actually tranfer isos. More specifically, how to make games actually show up in PSP mode.
Back to the old stuff http://wololo.net/downloads/index.php/download/7672
will be there an exploit for EU? 🙁