PSP Custom Firmwares 6.xx ME-2 and 6.xx LME-2 are now available!
Just one month ago, there has been an update for Neur0n’s popular ME & LME custom firmwares, made by developer Rahim-US, which offered support for the 6.20 firmware and added the permanent patch to the 6.20 LME CFW.
Today we are back and proudly present you yet another update for those great custom firmwares: The 6.xx ME-2 and the 6.xx LME-2.
The new version of the 6.xx ME & LME CFW is the revision 2.0, shortened to just ME/LME-2, which adds the Inferno driver, known from the PRO CFWs, and enhances the recovery menu a bit, by adding a few more colors to choose from. This was once again made by the talented developer Rahim-US.
The revision 2 update is available for all existing (latest) versions of the ME and LME custom firmwares, which would be firmwares 6.20, 6.39 and 6.60.
With the power of the Inferno driver the ME and LME CFW gets even better than before, since it enhances the game compatibility even more. Now with 2 powerful iso drivers, the ME and the Inferno driver, the ME and LME CFWs are the most versatile PSP custom firmwares there are.
(It is strongly recommended to replace existing translation files for the recovery menu and vsh menu, e.g. de_vshmenu.txt & de_recovery.txt, with the newer ones included in this revision Update.)
Download: 6.20 ME-2
Download: 6.39 ME-10; 6.39 ME-10 (OFW Version) and 6.39 LME-10
Download: 6.60 ME-2
Source via Twitter.com
Still I dont get what’s this new stuff :I
custom firmware update
if i use this on my PSP go with LME perma patch, will it be bad, and will it take away my perma patch
Uninstall your current perma patch.
Install the LME Update.
Re-Install the perma patch (of LME-2).
Have’nt updated my psp firmware in years. Works just fine. Even with FF Type-0
You must be a PRO user, then.
So this article obviously doesn’t apply to you.
The list above lists TA-095 v2 ( 9g ) as CFW 6.20 doesn’t going to 6.20 still cause a sleep bug?
Also Im curious if having added inferno to LME does it mean also the same no drm as pro is now in LME? I always favored LME but switched to pro for the ability to run more.
I also want to know if its has noDRM. I use Pro-C in my PSPGo moslty because of that.
Nope it doesn’t have the NoDRM Engine.
Not yet 😉
“Not yet”?
Don’t tease me, Z… I hate dual booting just to play VC3.
The Z loves to tease most like PRO Collection and ME will be almost the same in the long run and that is fine By ME (pun intended):)
The sleep bug for 6.20 09g 3000s can apparently not be fixed, but the firmware can be forced onto the psp, thats why it is technically possible to install it to the PSP.
So if one have a 09g with sleep bug and wants LCFW and no sleep bug still use 6.60 right
The sleep bug appears at 09g 3000 PSPs with firmwares below 6.30.
Update to 6.30 or higher to get rid of it.
Good day The Z, I responded to your response to get your attention on my question. I have PRO-C2 on my PSP model 3000. Obviously that and this 6.XX ME/LME-2 are both cfw for the PSP, but what is/are the difference(s) in brief (I know they might be numerous). Thanks for your time.
Difference between ME and LME?
ME is a full CFW but only for older PSPs (1000 and old 2000s).
LME is temporary, but for every PSP. LME can be perma patched to some PSPs at 6.20.
Thank you The Z, I appreciate it but I was inquiring the difference(s) between “that” (PRO-CFW) and “this 6.XX ME/LME-2.” Thanks once again for your response. I would appreciate another one answering the clarified question. God bless
Any reason to go from PRO-C to this one?
Superior VSH and Recovery Menu, native 1.5 kernel homebrew support and it offers one more UMD/ISO driver, the ME driver.
The rest is more or less the same.
owh that means, no need to use leda.prx plugin?
I mean, it can run 1.5 kernel homebrews (via LEDA) at any PSP, not only the PSP 1000.
You can install both (Dual boot) :3
You cant if you are using PRO perma patched.
It prevents booting other HENs/LCFWs.
Yeah i was implying on 6.60 XD
what about 6.20 LME + Perma Patch? Will it worked?
6.20 LME perma can boot into PRO but not TN.
6.20 TN perma can boot into LME & PRO.
If you are a non-perma FW, you can multi-boot everything.
Install ME and dual boot from their but be warned they do not yet play well together on saves
My other psp has both ME & PRO installed and i don’t have any game saves issues.
That just applies to you.
No one else had this problem, except for you, so stop spreading lies.
What about DRM? same?
can i use this on my vita exploit uno 1.81?
haha nope just for PSP’s
Wait i don’t get it.
I have a psp go white, with the 6.60 pro-C3…with this news update 6.xx ME/LME-2 is possible to apply the perm.patch?
Downgrade to 6.20 go
Install LME-2 CFW
Launch LME-2 CFW
Install LME-2 perma patch
Done.
it has always been possible to downgrade your GO to 6.20 then perma.
I run 6.20 Prop Perma on my GOs
Yeah i know but i wanna have it on 6.60 (the last OFW)…just this ^^
I alredy know that was possible downgrading the psp on firmware 6.20 =P
Sony changed the PSP behavior after 6.20 so perma patch of that method can not be executed from firmware greater than 6.20. All perma patch is is the loader hidden in flash lauched as a autoboot. SOny killed this 🙁 Wish the exploit had not been released till 6.60 it would prob still be there.
It got released as 6.35 was available.
Sony patched it in 6.30 “by luck”.
Ehm the pro C-2 CFW has 3 UMD ISO driver = Inferno, m33 driver and SONY NP9660!!!
ME has 6: Normal, OE, M33, ME, Sony and Inferno.
I just used installed this on psp go and all have all the drivers you said except the “Normal” One
There is no Normal driver on PSP Go, you know to play with Normal Mode you need to insert an UMD in your PSP drive, PSP Go doesn’t support UMD.
Yeah I found out a bit after posting
So if am on 6.60 ME 1.8… how would i update mine to 6.60 ME 2?
Download the 6.60 ME-2 updater from zload.net and update it.
Thats it. Update your translation files, if you want translated vsh and recovery menus.
Tnx.. will try this later….hope its stable as 1.8
how to update translated vsh and recovery menus?
copy the txt files from “translation” into your /seplugins/ folder.
Only use the ones for the language(s) you want.
I myself use english and german.
Tnx… very helpful… are there bugs in 6.60 ME-2 or none? is this still in beta stage or official?
Am I missing something the 6.20 me 2 has no perma patch in the dl so is it ok to use the old one from 1.9 thanks 🙂
The perma patch has to be updated for a LME CFW update, due to how it works at the LME CFW.
The 1.9 one would not work with 2.0.
oops my bad was looking at the non lme one dam 🙁
So when will we see LME 2.1 with nodrm?!?!? lol
That would be the ultimate lcfw for the GO.
Currently PRO B10Fix1 runs more and is perma on the go
LME2 is a nicer lcfw also perma on the go but lacking nodrm.
I Cant wait!!! LME is my favorite. I dunno if I even need no DRM I just know PRO has it. lol
Yep. I’m very excited over the idea of ME having the NoDRM engine one day. 😀
(Newbie)
I just wanna ask if I am using a Pro CFW then put the ME/LME-2 patch would that be fine?
so i want to install this permapatch thingy onto my go but the downgrader wont let me downgrade to 6.20. it asks if i want to remove the [Resume Game] feature and when i confirm its says it cant and exits. the pspgo is on 6.39 ofw. wat do?
Been out of the psp world for a while now. I have 6.60 me-2.2 waiting to go on my 1000 once my pro duo comes in from amazon. Do I just put “inferno” in the root of the memory stick? It’s been years and I’ve forgotten a lot on psp hacking.
Hi guys I don’t have twitter to contact Rahim but I’ve installed this for my psp but it wont work with gpsp kai thats a gba emulator which works fine on Pro cfw otherwise it is good cfw could someone please inform him thanks! Btw I’m using the light edition as I have a psp 3000